Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

Avail the Hot Runner Troubleshooting Services from World’s Best Hot Runner Manufacturer Anole

As the numbers of mold makers have increased recently, there is a growing demand for hot runners. Anole which is the best manufacturer of hot runner system also perform hot runner troubleshooting which is one of the essential services and it is required to maintain the hot runner in good condition. The company has well experienced technicians and engineers in the field of hot runner troubleshooting so that they are able to fix any type of problems in the hot runner system.

The leaking in the hot runner is one of the major problems which are faced nowadays. Most of this system leaking is caused due to the bad operation of the system by the user. The company ensures that the leaking will happen only between the manifold and nozzle. Based on the normal design of the system, nozzle will be having the steel edge in order to ensure that height of the hot nozzle is lower than that of the actual manifold groove. The difference in size of the manifold and nozzle is to avoid the damage of the components during the thermal expansion. This difference in size is called as cold clearance and if this is not achieved then damage to the nozzle edge is ensured. So the user must follow the design of the hot runner system perfectly in order to avoid the damage. It is always best to choose the specialized hot runner company in making the moulds. Anole has the knowledgeable and experienced designer and engineer who help in Hot Runner Troubleshooting. They also provide a lot of information for their customers to avoid the problems in hot runner system.

If you want to know more about Hot Runner Company, you can refer through the website http://www.anole-hot-runner.com/


Don't be the product, buy the product!